CUSTOMER SUPPORT: 1-626-442-3988 M-F 10AM-6PM PT

Subaru Impreza (GJ/GP) 2012-16 Mono-GR Gravel Coilovers

Subaru Impreza (GJ/GP) 2012-16 Mono-GR Gravel Coilovers

More Views

Subaru Impreza (GJ/GP) 2012-16 Mono-GR Gravel Coilovers
$1,200.00
SKU: MGV8125-C

Availability: Out of stock

$1,200.00
  • Compatible With Subaru Impreza (GJ/GP) 2012 2013 2014 2015 2016
  • 52mm Mono-Tube Stainless Steel Shock With 32 Levels of Damping Adjustment Corresponds to Handle and Comfort.
  • 20mm Internal Piston Paired With Koyo 6204z Bearing Provides Smooth Stroke; Durable Lightweight Aluminum And Carbon Steel Components
  • Independent Spring Tension Preload And Ride Height Adjustment; High Viscosity Index Shock Fluid;
  • Full 1 Year Limited Warranty From Date Of Purchase; Install By Experienced Professionals Is Highly Recommended; Shock Absorber Can Be Rebuild When Worn Out
Coilover Lift Kit Compatible With Compatible With Subaru Impreza (GJ/GP) 2012 2013 2014 2015 2016

CALIFORNIA WARNING: Product Contains "Nickle" That Know To Cause Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Details

Godspeed Project's Mono-GR Gravel Coilovers are built to handle the abuse of the gravel rally racing circuit. The system builds off our best selling MonoRS kit but features a lengthened shock stroke combined with longer springs (ranging from 250mm to 270mm) which allow it to easily absorb uneven road conditions. In addition, the Mono-Gravel Coilover Kit features heavy duty top plates and lower mounts for added strength and durability. Ride height can be adjusted +/- 50mm from OE ride height.

Features:

  • 32 precise levels of damper adjustment for handle and comfort
  • Extended springs, shock length and piston stroke
  • 52 mm O.D. monotube shock design with Anodized Finished
  • 20 mm O.D. solid stainless steel shock shaft
  • Lightweight aluminum and durable carbon steel components
  • Independent ride height and spring preload adjustments
  • High viscosity index shock fluid
  • 1 Year Warranty from Date of Purchase

NOTE: Alignment is necessary after installation.  To proper align any the vehicle, always loosen bolts on the control arms then tighten them after the car is on the ground. After tighten control arm bolts, You can process to adjust all the necessary camber/toe angle to recommended specifications.

Additional Information

Special Notes Prior to installation, verify all hardware and properly tighten and spring preload is set to 5-10mm(1/4-3/8in). Our technical department is available to answer any other questions.
Damping Levels 32 Levels
Height Adjustment Yes
Spring Rate(Front) 8 kg/mm (448 lbs/inch)
Spring Rate(Rear) 6 kg/mm (336 lbs/inch)
Spring Length(Front) 260 mm
Spring Length(Rear) 220 mm
Front Top Mount Yes, Pillow Ball Camber Plate
Rear Top Mount Yes, Standard Type
Spring Inner Diameter(Front) 62 mm (2.44 inch)
Spring Inner Diameter(Rear) 62 mm (2.44 inch)
Warranty Note No
User Guide Coilover User Guide

Compatibility Fitment List

No active finders or options.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.