Details
Godspeed Project's MonoSS is our one entity in our family of single-adjustable coilover suspension kits. These coilovers are designed to be a streetable race built coilover at an affordable price. It features a monotube damper that is made out of a carbon seamless steel 52mm tube with a performance internal piston providing maximum damper response. The cold-bent springs are made from high strength SAE9252 steel to optimize the balance between performance and comfort. Using race quality shock oil, Godspeed Project can guarantee exceptional damper performance at any temperature on and off the track. The top of the shock is attached to the car using a high quality top hat that features a high performance Japanese KOYO 6204Z bearing pillow ball mount (when applicable). The bottom shock brackets are made out of a T7075 forged aluminum or carbon steel brackets for lighter weight without sacrificing durability which also includes brake line brackets (when applicable). The MonoSS offers 16 level of damper adjust ability which can be set to your preference.
Features:
- Improved Springs Rate To Help Ride Handling And Response
- Valving Allows 16 Precise Levels of Rebound Adjustment
- Koyo Japan 6204z Bearing To Improve Piston Strokes Smoother
- Larger Capacity 52mm Mono-tube Shock Design, Anti-Corrosion Anodized Finished
- Racing Grade Shock Oil With High Viscosity Index
- Weight Saving Aluminum Components And Carbon Steel Lower Mount Brackets
- Independent Ride Height and Spring Pre-load Adjustments
- Where Applicable Front Camber Plates With Pillow-ball Top Mount for Camber Adjustment
- 1 Year Warranty from Date of Purchase
Additional Information
| Special Notes | Prior to installation, verify all hardware and properly tighten and spring preload is set to 5-10mm(1/4-3/8in). Our technical department is available to answer any other questions. |
|---|---|
| Damping Levels | 16-Level |
| Height Adjustment | Yes |
| Spring Rate(Front) | 6 kg/mm (336 lbs/inch) |
| Spring Rate(Rear) | 5 kg/mm (280 lbs/inch) |
| Spring Length(Front) | 180 mm |
| Spring Length(Rear) | 210 mm |
| Front Top Mount | Yes, Pillow Ball w/ Camber Plate |
| Rear Top Mount | Yes, Standard Type |
| Spring Inner Diameter(Front) | 62 mm |
| Spring Inner Diameter(Rear) | 75-102 mm (2.95-4.09 in.) |
| Warranty Note | No |
| User Guide | Coilover User Guide |
